1.) The camera is the silver cylinder shaped unit. Mount the camera in the barn.
2.) The camera is powered by the 12VDC adapter.
Connect the 12VDC adapter to the black barrel
connector on the camera. Plug the 12VDC
adapter into an outlet in the Barn (use the 25’
power extension cable if the camera is not next to
an outlet).
3) Run your 500 or
1000 feet of coax cable to the house. You should purchase
this in single continuous rolls. If you must connecct
multiple cables, you should apply shrink tubing to protect the
connection from the elements.
Safety Precautions
*Only use with the power supplies provided with the system.
*A surge protector is always recommended.
*Do not expose the power supplies to moisture.
*Do not modify the system. Refer to qualified personnel only.
House Connection
50' Video Cable
RCA Gold Connector
VCR/TV Video Input
TV/VCR Connection:
1.) The 50 feet of video cable connects to the video input jack on your recording or viewing device. Any device with video input capabilities can be used, for example, a VCR, TV, camcorder or computer. Connect the gold RCA connector the to the jack on your TV/VCR labeled Video input.
2) Turn the power to your TV/VCR ON. Select the video input channel on your recording or viewing device that corresponds with the video input jack that the cable is connected to. This is usually done through the input button on the remote control. For additional information consult your TV, monitor or VCR instruction manual.
If you have any questions regarding the setup or operation of this unit, please feel free to contact Riverwind Supply Technical support at 888-409-7665 or sales.support@foalingcamera.com
Barn Installation
Mount Camera(s) in Barn
50' Video Cable
RCA Gold Connector
VCR/TV Video Input
If you have any questions regarding the setup or operation of this unit, please feel free to contact Riverwind Supply Technical support at 888-409-7665 or sales.support@foalingcamera.com
