Barn Installation for Multiple Wireless Cameras |
| Mount the camera(s) in barn |
Connect the camera to the extension |
Run the extension cable from
camera(s) to switcher |
 |
 |
 |
Plug the camera extension into an input jack on the rear of the switcher. Yellow video and White audio. Connect a power supply to the extension. Repeat for additional cameras. Note - power for the entire system is only needed at the switcher's site. We recommend a surge protector for protection and to provide adequate outlets. |
Connect an extension cable to the output jacks on the rear of the switcher. Connect the transmitters power supply. Be sure to use the power supply marked "Transmitter". |
Run the output extension to the transmitter on the outside of the barn and plug in. All Connections are color coded. |
 |
 |
 |
Camera, Switcher & Transmitter |
Transmitter should be
mounted with the cover
facing the house. |
1.) The camera is the black cylinder shaped unit. The camera connects to the switcher via the extension cable (yellow video & white audio) Audio is optional. Connect the black or red barrel power connector to the AC power adapter. |
| 2.) Connect an extension cable to the video & audio output jacks of the switcher and connect the red or black power line to an AC adapter. Connect the other end of the extension cable to the transmitter’s video, audio and power jacks. The Transmitter is the small gray box. |
| 3.) Use the switch to select the camera you wish to view. Select the dwell (rotation)
speed and turn the power on. Refer to the switcher’s manual for complete instructions. |
|
|
| Choose to bypass a camera, put it in rotation (AUTO), or lock onto it (HOME) |
Select rotation from 1/2 to 15 seconds per camera (Run Time) |
Safety Precautions
*Only use with the power supplies provided with the system.
*A surge protector is always recommended.
*Do not expose the receiver or power supplies to moisture.
*Do not modify the system. Refer to qualified personnel only. |
| |
